XRNT Fuse Holders and Accessories
The holder (universal contact clip) is intended for mounting XRNT fuses on post insulators. It is suitable for all XRNT fuse ratings (7.2, 12, 24, and 40.5 kV).
The holder set for one fuse includes:
The holder set for one fuse includes:
- Contact clip – 2 pcs.
- Retainer – 2 pcs.
- M12x30 Bolt – 2 pcs.
- M12 Nut – 2 pcs.
- Holder terminal bar – 2 pcs.
- M12 Spring washer – 2 pcs.
- M12 Flat washer – 2 pcs.
- M10x30 Bolt – 2 pcs.
- M10 Nut – 2 pcs.
- M10 Spring washer – 2 pcs.
- M10 Flat washer – 2 pcs.
- Holder terminal bar – 2 pcs.
Fuse operation signaling contact is a device equipped with a special auxiliary contact.
Upon fuse operation, the striker located at the end ejects with a specified force and actuates the mechanism that closes the contact to send a signal to a lamp, relay, or controller, indicating an emergency condition. This allows automating the fuse condition monitoring and responding promptly to open circuits.
Upon fuse operation, the striker located at the end ejects with a specified force and actuates the mechanism that closes the contact to send a signal to a lamp, relay, or controller, indicating an emergency condition. This allows automating the fuse condition monitoring and responding promptly to open circuits.
