Cable Connectors 7.2-24 kV Interface A
CCA 7.2-24 kV are used to connect single-core and three-core cables with plastic insulation to Interface A bushings according to EN 50181 of solid insulated, gas-insulated, and dry (clean) air-insulated switchgear for 7.2-24 kV, and provide their reliable sealing, insulation, and electrical connection. CCA do not require prior installation of cable joints, and are made of high-quality elastomer resistant to moisture, dust, heat, and cold. This type of connectors is produced only in shielded design, for single connection, currents up to 250 A and voltage up to 24 kV. In most cases, CCA are used to connect switchgear to voltage transformers and power transformers with low currents up to 250 A.
Straight CCA structure
1 – Bushing; 2 – M10 nut; 3 – Connector housing; 4 – Wing nut; 5 – Cable end; 6 – Retaining bracket; 7 – Clamping plate; 8 – Cable.
L-shaped CCA structure
1 – Bushing; 2 – Contact pin; 3 – Connector housing; 4 – Clamping plate; 5 – Wing nut; 6 – Cable end; 7 – Mounting bracket.
Kit Contents
Straight CCA kit 210-95
Cable cross-section is selected from the range: 25, 35, 50, 70, 95, 120 mm².
Ordering example: CCA-210-95 A – Insulated L-shaped connector for connecting a cable with a cross-section of 95 mm² with a nominal current up to 250 A and voltage 7.2-12 kV for Interface A bushing.
Ordering example: CCA-210-95 A – Insulated L-shaped connector for connecting a cable with a cross-section of 95 mm² with a nominal current up to 250 A and voltage 7.2-12 kV for Interface A bushing.
Examples of CCA application in 7.2-24 kV networks
Cable connection
(Used connector CCA-210-95 A)
Cable connection
(Used connector CCA-210-95 A)